When using a laptop, you will always need to ensure the battery is charged. If you don’t have enough battery power, then your laptop will not be able to turn on without the power button.

This guide will show you simple ways on how to turn on laptop without Power Button. These methods are easy to do and work well for almost all laptops!

You May Also Like: Prevent laptop shutdown when moved: Laptop shuts off when moved

Why is laptop not turning on?

It is common for a laptop to not turn on. In fact, it’s pretty common. However, if you are experiencing this problem and your laptop has been working fine up until now, there might be some hidden problems causing it to stop working properly. 

Here are some common reasons why laptops don’t turn on:

Battery problem

If your laptop is not turning on, check if the battery is charged. If it’s already fully charged, try unplugging it from the power socket and then plugging back in again. 

You can also try charging your battery with another charger with a different voltage rating than your laptop’s (this will help prevent damage to both components).

Motherboard problems

If your laptop’s motherboard is damaged, it won’t turn on. The motherboard is the main component of a computer that contains everything from CPU (Central Processing Unit) chips to graphics cards and memory. 

It’s also known as the baseboard or brain of your laptop because it controls everything else in your machine, including its battery life and performance.

If you have a bad motherboard, it may be causing issues with your laptop’s battery performance and longevity over time.

The power supply unit is not functioning properly

If you are trying to fix a laptop that won’t turn on, and you think the power supply unit is not working properly, there are several things to check. The first is whether or not your laptop has a spare power supply. 

If it does, try using that instead. Another thing to do would be to check if your battery could affect the system’s performance by draining down too much energy from batteries.

CPU fan malfunction

If the CPU fan is not working, it could be due to several reasons. First, if your laptop has been running for a long time without shutting off or rebooting (the screen goes blank), there is probably an issue with the battery. 

This can cause corrosion that damages the electrical connections between components inside your computer and its motherboard, leading to all kinds of problems down the line.

If you’ve recently replaced your battery, follow our guide here: How To Replace Your Laptop Battery In 10 Minutes Or Less! – You’ll want to make sure that everything works properly before putting everything back together again so that no problems arise when starting up again!

Overheating problem

If your laptop is overheating, it could cause the battery to drain faster. 

This puts you at risk of losing power when you need it most. When your laptop gets too hot, several things can cause this problem:

• The CPU (central processing unit) has been running for too long; this causes the fan to spin up faster and make more noise than usual.
• The GPU (graphics processing unit) is working harder than usual; it takes longer for the video card to render images on screen, leading to slower performance overall.

You May Also Like: Find a printer compatible with Lenovo laptops: What printer is compatible with Lenovo laptop?

How to install a new power button?  

The good news is that it’s usually just a matter of snapping out the old power button and popping in the new one.

The power button is a round thing on the front of your laptop. It’s usually labeled “Power” or “Sleep/Wake,” but if you can’t find it, just look for a small round button with a symbol. It’ll be somewhere near the top middle of your laptop.

If there’s no label, don’t worry! It’s an easy fix!

If you have a label, just pop off the old power button and put in your new one. If you don’t have a title, try looking around at other parts of your laptop. 

There might be something similar to what you’re looking for: maybe there’s an actual button labeled “sleep/wake,” or maybe there are two buttons next to each other (one for sleep and one for wake).

Once you’ve found your new power button, snap it back into place and enjoy your new, better-working laptop!

How to turn on Laptop without Power Button?

No matter what kind of laptop you have, you’ll want to know how to turn it on. Suppose your laptop has no power button, and the battery is completely dead. 

In that case, the only way to turn on your laptop is with a keyboard or motherboard. 

In this article, we’ll go over how each of those methods works and what they look like when done correctly.

Keyboard

To turn on your laptop using a keyboard, follow these steps:

• Access the BIOS by pressing the “F2”, “F10”, or “DEL” keys when you boot up your laptop.
• Locate the “power management” settings. This will vary by manufacturer, but you should find a similar option to “power on by keyboard” to enable this feature (or ensure it isn’t disabled). If your machine has multiple power sources for different tasks, such as battery and AC, you may also have additional options here; consult your manual for more details about how to configure these features if necessary.
• Configure backup power buttons and save them into memory before turning off your computer completely; then unplug everything except power cords from outlets around the room before restarting again once more after letting all other devices finish charging first!

Motherboard

If your laptop is turned on, you may have a good charging cable or motherboard. To fix this problem, follow these steps:

• Unplug the charging cable.
• Open the laptop case and locate the power button.
• Remove the power button by gently pulling it out from its socket, then disconnecting it from its pins at either end. The pin nearest you will likely be red or yellow; if so, use any conductor (like a screwdriver) to short circuit pins 1 and 3 until all four lights flash rapidly for about 10 seconds; then, reconnect them with a wire if necessary. There must be no other wires connected here! We’re trying not only to turn on our computers but also to keep them running as long as possible without having them stop working altogether due to electrical damage caused by removing something incorrectly!

Clock battery

The clock battery method is difficult to do correctly. It takes a lot of practice and patience

• Connect your laptop to an external power source. Make sure the battery is at least 50% charged before you begin this process. If it’s not, don’t try this unless you have time on your hands and know how long it will take for your laptop’s battery to charge up enough for this trickery!
• Disconnect both USB 2 ports from external devices (like hard drives or printers). This will prevent interference from other devices when trying out step 3 below later in this article series!

You May Also Like: Remove white spots on your laptop screen: How to remove white spots on a laptop screen

Wall socket

If you have a laptop, you can use it to turn on your laptop. This trick works for laptops with no power button and those who want to unplug their devices from their power sockets.

• First, disconnect the cable that connects the power button to the motherboard using a flathead screwdriver or another plastic tool.
• Remove the battery from your computer’s motherboard if it has one (usually located near where you would plug in an adapter).
• Plug your laptop into an electrical outlet with its AC adapter plugged into another socket in case something goes wrong during this process; otherwise, leave both cords connected at all times until finished with this guide!

You May Also Like: Brighten your laptop screen beyond the max: How to make laptop screen brighter than max

Laptop lid

The easiest way to turn on your laptop is by using the lid. You can do this by:

• Pressing the “F2”, “F10,” or “DEL” keys when you start up your machine. This will enable you to enter BIOS and change settings there
• Pressing Enter and F2/F10 at the same time when starting up your laptop. Now go into the Power Management menu to adjust settings for power on with the open lid.

Wake on LAN

To turn on a laptop using a Wake on LAN, follow these steps:

• Press the “F2”, “F10,” or “DEL” keys when you start your laptop to enter BIOS (the setup program).
• Select Advanced from the menu that appears and then go to Power Management > Sleep Mode Settings.
• Enable Wake-on-LAN and set preferred keys for turning on your laptop (e.g., keyboard or mouse). Save settings and reboot your machine.

You May Also Like: Resolve MacBook screen issues: Why does my MacBook screen go black at certain angles?

How can I turn on my laptop using the keyboard?

To turn on your laptop using a keyboard, follow these steps:

Access the BIOS by pressing the “F2”, “F10”, or “DEL” keys when you boot up your laptop.

Locate the “power management” settings. This will vary by manufacturer, but you should find a similar option to “power on by keyboard” to enable this feature (or ensure it isn’t disabled).

If your machine has multiple power sources for different tasks, such as battery and AC, you may also have additional options here; consult your manual for more details about how to configure these features if necessary.

Configure backup power buttons and save them into memory before turning off your computer completely; then unplug everything except power cords from outlets around the room before restarting again once more after letting all other devices finish charging first!

Can I turn on my Laptop with lid?

You can turn on your with your laptop lid!

You can start your by pressing the “F2”, “F10,” or “DEL” keys when you start up your machine. This will enable you to enter BIOS and change settings there.

To turn on your with an open lid, press Enter and F2/F10 simultaneously when starting your computer. Now go into the Power Management menu to adjust settings for power on with an open lid.

You May Also Like: Keep your laptop screen and keyboard clean: How to clean a laptop screen and keyboard

What does it mean if my laptop won’t turn on?

If your laptop doesn’t turn on, it could mean many things. The most common problem is a bad power supply, which can be caused by a loose connection or a problem with the cable.

If you can turn the laptop on and off, and if it still won’t power on after a few tries, there might be an issue with the motherboard.

If your laptop has an integrated graphics card (such as Intel HD Graphics) and it won’t boot up or turn on, there could be problems with the system board and/or graphics card.

Suppose your battery is completely dead, and you can’t use another device or charger. In that case, there may be an issue with your power adapter or connector.

Frequently Asked Questions

Conclusion 

There are several methods available to turn on your laptop without a power button. 

But you must follow the procedure step by step to complete it successfully. Online communities and other blogs suggest various ways. 

However, we found that most ways could be more efficient or risky if you are new to computer systems. 

Therefore we hope the procedures and methods mentioned above will be helpful for amateur PC users who don’t have much knowledge about computers but want to learn something new.